PD6701 Field-Mount Loop-Powered Feet & Inches Level Meter
Instruction Manual
19
Setting Up the Password
(
PASSWRD
)
The
Password
menu is used to program a five-digit
password to prevent unauthorized changes to the
programmed parameter settings. A password
protected meter will display
LOCKED
when the
MENU
button is pressed.
Locking the Meter
Enter the
Password
menu and program a five-digit
password.
For instructions on how to program numeric values
see
Record the password for future reference. If
appropriate, it may be recorded in the space provided.
Model:
Serial Number:
Password:
__ __ __ __ __
Making Changes to a Password
Protected Meter
If the meter is password protected, the meter will
display the message
LOCKED
when the Menu button
is pressed. Press the Enter button while the message
is being displayed and enter the correct password to
gain access to the menu. After exiting the
programming mode, the meter returns to its password
protected condition.
Disabling Password Protection
To disable the password protection, access the
Password
menu and enter the correct password,
as shown below.
If the correct five-digit password is entered, the meter
displays the message
UNLOCK
D
(
unlocked
) and the
protection is disabled until a new password is
programmed.
If the password entered is incorrect, the meter
displays the message
LOCKED
and returns to Run
Mode. To try again, repeat the above procedure.
Did you forget the password?
The password may be disabled by entering a
master password. If you are authorized to make
changes, enter the master password 50865 to
unlock the meter.
FT
IN
FT
IN
