PRECISION DIGITAL PD6701, Instruction Manual

Page: 15 / 23

PD6701 Field-Mount Loop-Powered Feet & Inches Level Meter
Instruction Manual
15
Advanced Features Menu
(
ADVANCE
)
To simplify the setup process, functions not needed
for most applications are located in the
Advanced
Features Menu . Access the Advanced Features Menu
by pressing ENTER at the ADVANCE menu in the
Main Menu defined on page 11 .
The Advanced Features Menu is used to select:
1. Open collector
output configuration
(
OUTPUT )
2. Input filter (
FILTER
)
3. Volume display
scale (
VOLSCAL
)
4. Live signal level
display calibration
(
LVL CAL
)
5. Internal Calibration
( ICAL )
6. Multipoint
linearization for level
(
MULTIPT )
7. Meter system
information display
(
INFO
)
Advanced Features Menu &
Display Messages
The following table shows the Advanced features
menu functions and messages in the order they
appear in the menu.
Display Parameter Action/Setting
OUTPUT
Output Enter output menu
OFF
Off Disable output
ALARM
Alarm Output Enter alarm output menu
LEVEL
Level Alarm Assign alarm output to
level
SET
Set Point Set alarm set point
RESET
Reset Point Set alarm reset point
VOLUME
Volume Alarm Assign alarm output to
volume
FILTER
Filter Set noise filter
LO
Filter Low Set noise filter to low
setting
MED
Filter Medium Set noise filter to
medium setting
HI
Filter High
Set noise filter to high
setting
OFF
Filter Off Disable noise filter
VOLSCAL
Volume Scale Scale the volume
display
NO PTS
Number of
Points Set the number of
points for volume
scaling
INPUT 1
Input 1 Set volume input 1 on
the level display
DSPLY 1
Display 1 Set volume display 1
INPUT 2
Input 2 Set volume input 2 on
the level display
DSPLY 2
Display 2 Set volume display 2