PD663 Loop-Powered Meter
Instruction Manual
29
Reset Meter to Factory Defaults
When the parameters have been changed in a way that is difficult to determine
what’s happening, it might be better to start the setup process from the factory
defaults.
Instructions to load factory defaults:
Enter the
Advanced
features menu. See Advanced Features Menu, page 23.
Press
Up
arrow button to display
info
menu.
Press
Right
arrow button when
info
is shown.
Press
Enter
button when
rSt
is shown.
Press
Enter
again when display flashes
rSt
.
Note: If
Enter
is not pressed a second time within three seconds,
rSt
will stop
flashing and the last
Enter
press cancelled.
The meter goes through an initialization sequence (same as on power-up), and
loads the factory default settings.
rSt
info
Press and Hold for 5 Sec
Meter Re-
Initializes
Flashing
Display
rSt
FNc
