PD663 Loop-Powered Meter
Instruction Manual
20
Main Menu Display Functions & Messages
The meter displays various functions and messages during setup, programming,
and operation. The following table shows the main menu functions and
messages in the order they appear in the menu.
Display Parameter
Action/Setting
dp
Decimal point
Set decimal point
SCL
Scale
Enter the
Scale
menu
Npt
Number of Points
Set number of linearization points
in1
Scale Input 1
Input signal 1 value (mA)
D1
Scale Display 1
Scaled value for input 1
in2
Scale Input 2
Input signal 2 value (mA)
D2
Scale Display 2
Scaled value for input 2
CAL
Calibrate
Enter the
Calibrate
menu
Npt
Number of Points
Set number of linearization points
in1
Calibrate Input 1
Read input signal 1
D1
Calibrate Display 1
Enter value for input 1
in2
Calibrate Input 2
Read input signal 2
D2
Calibrate Display 2
Enter value for input 2
Setting the Decimal Point (
dP
)
Decimal point may be set with up to three decimal places or with no decimal
point at all.
Pressing the
Right
or
Up
arrow moves the decimal point one place to the right
until no decimal point is displayed, then it moves to the left most position.
dP
dd.dd
or
Select Decimal Point
Next
