Model PD6300 Pulse Input Rate/Totalizer
Instruction Manual
38
Setting the Input Signal (
Input
)
There is a switch, located to the right of the input connector, which must
be configured according to the input level and type. Jumper J4 located
inside the meter, behind the input signal connector, is used to select the
excitation voltage (24 V*, 10 V or 5 V) which is supplied to the P+ and P-
wiring terminals.
*
Default setting
Enter the Input menu to enable or disable the totalizer features.
Setting the Totalizer Features (
total
)
Enable or disable the totalizer features by selecting “
Yes
” or “
no
” after
the input type has been set up. If the totalizer features are disabled, most
totalizer features and functions are hidden from the menus.
Note: The totalizer continues working in the background.
