Model PD6300 Pulse Input Rate/Totalizer
Instruction Manual
77
Meter Copy Function (
Copy
)
The
Copy
function is used to copy (or clone) all the settings from one
meter to other meters requiring exactly the same setup and
programming (
i.e
. type of input, scaling, decimal point, filter, gate, etc.).
Warning!
Only the PDA1200 meter copy cable must be used
for meter-to-meter interfacing.
Using standard CAT5 or other cable will cause
damage to both meters.
Figure 21: Meter Copy Connection
Copy Function Requirements
To successfully copy settings from one
meter to another, both meters must have:
1. Same software version
2. Same baud rate setting
See
Determining Software Version
,
page 81 for instructions.
PDA1200 Meter Copy Cable
