PD2-6262 Helios Large Display Analog Dual-Input Rate/Totalizer Instruction Manual
57
Function Keys & Digital I/O Available Settings
Display
Description
Rst Hi
Reset the stored maximum display
values for all channels
Rst Lo
Reset the stored minimum display
values for all channels
Rst HL
Reset the stored maximum &
minimum display values for all
channels
relay
Directly access the relay menu
Set 1
*
Directly access the set point menu
for relay 1 (*through 8)
Rly d
Disable all relays until a button
assigned to
enable relays
(
Rly E
)
is pressed
Rly E
Enable all relays to function as they
have been programmed
O Hold
Hold current relay states as they
are until a button assigned to
enable relays
(
Rly E
) is pressed
d Hold
Hold the current display value
momentarily while the function key
or digital input is active. The
process value will continue to be
calculated in the background.
D AbC
Scrolls values for A, B & C when
activated. Keeps the last value for
10 seconds and then it returns to its
assignment. Values are displayed
on display line 1 and the
corresponding channel and units on
display line 2.
d tot
Scrolls through totals for channels
A, B, and C (which is the sum of A
and B). Values are displayed on
display line 1.
D gtot
Scrolls through grand totals for
channels A, B, and C (which is the
sum of A and B). Values are
displayed on display line 1.
Ln1 Hi
Display maximum channel A display
value on line 1
Ln1 Lo
Display minimum channel A display
value on line 1
Ln1 HL
Display maximum & minimum
channel A display values on line 1
Display
Description
Ln2 Hi
Display maximum channel B display
value on line 2
Ln2 Lo
Display minimum Channel B display
value on line 2
Ln2 HL
Display maximum & minimum
channel B display values on line 2
Ln2 HC
Display minimum channel C display
value on line 2
Ln2 HC
Display maximum & minimum
channel C display values on line 2
LitHLC
Display maximum channel C
display value on line 2
F On 1
*
Force relay 1 (*through 4) into the
on state. This function is used in
conjunction with a digital input
expansion module to achieve
interlock functionality. See page 45
for details about interlock relays.
Contrl
Directly access the control menu
disabl
Disable the selected function key or
digital I/O
AcH
Acknowledge all active relays that
are in a manual operation mode
such as auto-manual or latching
Reset
Directly access the reset menu
Rst t
Reset totals for all channels
Rst gt
Reset grand totals for all channels
Rst ta
Reset total for channel A
Rst ga
Reset grand total for channel A
Rst tb
Reset total for channel B
Rst gb
Reset grand total for channel B
nmenu
Mimic the menu button functionality
(digital inputs only)
rigHt
Mimic the right arrow/F1 button
functionality (digital inputs only)
up
Mimic the up arrow/F2 button
functionality (digital inputs only)
Enter
Mimic the enter/F3 button
functionality (digital inputs only)
Alnm 1
*
Provide indication when alarm 1
(*through 8) has been triggered
(digital outputs only)
*
If math functions are displayed, the math function indicator LED “C” will flash when either A or B
channel is using a tare value (net value).
