Helios Large Display Strain Gauge Meter Instruction Manual
PD2-6100
34
Setting the Display Parameter & Intensity (
dsplay
)
The main display (
line 1
) can be
programmed to display:
1. Process value 1 (PV1)
2. Process value 2 (PV2)
3. Percent of PV1 (PCT)
4. Relay set points
5. Max & min values
6. Modbus input
7. Display reading and units
8. Display gross
9. Toggle net & gross
The small display (
Line 2
) can be
programmed to display:
1. Unit
2. Process value 1 (PV1)
3. Process value 2 (PV2)
4. Percent of PV1 (PCT)
5. Relay set points
6. Max & min values
7. Engineering units or custom
legends
8. Modbus input
9. Off (no display)
10. Toggle reading and units
11. Display gross
12. Toggle net/gross
Display Intensity:
The meter has eight display
intensity levels to give the best performance under
various lighting conditions. Select intensity 8 for
outdoor applications. The default intensity setting is 8.
After setting up the input and display, press the Menu
button to exit programming and skip the rest of the
setup menu. Press the Menu button again and the Up
arrow to reach the
Program
menu and complete the
scaling or calibration of the meter.
www.
GlobalTestSupply
.com
Find Quality Products Online at:
