Precision Digital Corporation PDA1500 Series Instruction Manual Download Page 2 | Manualshive

Page: 2 / 24

background image

Model PDA1500 Logic Level Converter

Instruction Manual

2

Disclaimer

The information contained in this document is subject to change
without notice. Precision Digital makes no representations or
warranties with respect to the contents hereof and specifically
disclaims any implied warranties of merchantability or fitness for a
particular purpose.

CAUTION

Read complete instructions

prior to installation and
operation of the meter.

WARNING

Risk of electric shock or

personal injury.

Warning

This product is not recommended for life support applications
or applications where malfunctioning could result in personal
injury or property loss. Anyone using this product for such
applications does so at his/her own risk. Precision Digital
Corporation shall not be held liable for damages resulting from
such improper use.

Limited Warranty

Precision Digital Corporation warrants this product against defects in
material or workmanship for the specified period under
“Specifications” from the date of shipment from the factory. Precision
Digital’s liability under this limited warranty shall not exceed the
purchase value, repair, or replacement of the defective unit.

Registered Trademarks

P

RO

V

U

®

and Vigilante

®

are a registered trademarks of Precision Digital

Corporation. All other trademarks mentioned in this document are the
property of their respective owners.
© 2014 Precision Digital Corporation. All rights reserved.

www.predig.com

!

«
1
2
3
4
...
»

Summary of Contents for PDA1500 Series

























Reviews:

No comments

Related manuals for PDA1500 Series

Brand: 3onedata Pages: 3

Brand: 3onedata Pages: 9

Brand: 3onedata Pages: 3

Brand: 3onedata Pages: 3

Brand: 3onedata Pages: 3

Brand: 3onedata Pages: 3

Brand: 3onedata Pages: 7

Brand: TDT Pages: 2

Brand: Karma Pages: 12

Brand: MAER IDROPULITRICI Pages: 13

Varispeed-606PC3

Brand: YASKAWA Pages: 157

Brand: B&B Electronics Pages: 2

Brand: Avermedia Pages: 38

Brand: Badger Meter Pages: 12

Brand: Humandata Pages: 10

Brand: Mosa Pages: 48

VECTOPOWER VP600 Series

Brand: Aradex Pages: 114

Brand: Silicon Solar Pages: 3

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands