Model PD6363 Pulse Dual-Input Rate/Totalizer Instruction Manual
85
Programmable Function Keys User Menu (
user
)
The
User
menu allows the user to assign the front panel function keys
F1, F2, F3, F4 (digital input) and up to eight digital inputs to access
most of the menus or to activate functions immediately (e.g. Reset max
& min). F4 is a digital input on the signal input connector. Up to eight
digital outputs can be assigned to a number of actions and functions
executed by the meter (e.g. Alarms, relay acknowledgement, etc.).
Please refer to the table below, which continues on the following page.
Function Keys & Digital I/O Available Settings
Display Description
Display Description
Rst HL
Reset max & min
(A, B, C)
up-d b
Total count mode
direction control,
channel B
relay
Relay menu
Contrl
Control menu
Set 1
Set point 1 - 8
AcH
Acknowledge relays
Rly d
Disable relay
reset
Reset menu
Rly E
Enable relay
Rst t
Reset all totals
O Hold
Relay output hold
Rst gt
Reset all grand totals
D Hold
Display hold while
active
Rst ta
Reset channel A total
D AbC
Scrolls values for A, B
& C. Keeps the last
value for 10 seconds
and then it returns to
its assignment.
Values are displayed
on the big display and
the channel and units
on the little display.
Rst ga
Reset channel A
grand total
D tot
Display total
Rst tb
Reset channel B total
*If installed
