PD154 & PD158 Vigilante
®
II Annunciators
Instruction Manual
23
NO/NC Programming Example
The following is an example of NO/NC setup. Input channel 1 and 2 are
changed from the default settings of NO to be NC inputs.
1. Press and hold
ACK
and
RESET
for 3 seconds. When all
LEDs cycle, release.
2. Press
ACK
within 3 seconds. All LEDs blink in unison.
3. Press
ACK
again while LEDs blink
4. LED 1 will be off indicating a
NO input for channel 1. All
other LEDs will be dim.
5. Press
RESET
to change LED 1
from off to on, setting
channel 1 for a NC input.
6. Press
ACK
to confirm the NC
setting and proceed to program
channel 2.
7. Press
RESET
to change LED 2
from off to on, setting
channel 2 for a NC input.
8. Press
ACK
to confirm the NC setting and program channel 3.
9. Press and hold
ACK
for five seconds to return to normal
operation.
