PD154 & PD158 Vigilante
®
II Annunciators
Instruction Manual
18
UNIT 2
F
I
SIL
RST
ACK
COM
FO
F
I
SIL
RST
ACK
COM
FO
UNIT 1
UNIT 3
F
I
SIL
RST
ACK
COM
FO
Figure 10. System with Multiple Units Share First-Out
SETUP AND PROGRAMMING
Overview
There are no jumpers involved in the setup process of the annunciator.
The sequence selector switch, located on the rear of the annunciator
above the signal connector must be set accordingly for annunciator
sequence desired.
Normally open or normally closed input setup, relay fail-safe, and
additional sequence options are programmed with the front panel
pushbuttons.
After power and signal connections have been completed and verified,
and the sequence selector switch has been set appropriately, apply
power to the annunciator.
For a
Quick Setup Guide
go to page 4
