Model 3710 Plasma Control Console
Operator’s
Manual
_____________________________________________________________________________________________________________________
Issued: 03/11
Page
27
Section 3
Installation
3.1
Unpacking/Mounting
1. Remove shipping crate panel marked “FRONT” to reveal console.
2. Remove all packing material and parts containers from around
console.
3. Have two workers lift the console clear of the crate and place console
(rear panel down) on a cart for transport to working location.
Alternately, place console on a two-wheel dolly with left side down
and rear panel toward dolly, then fasten the console to the dolly with a
securing strap.
CAUTION
Before moving, carefully inspect for any shipping damage. Purchaser
must file any claims for loss or damage incurred in transit with the
carrier. The manufacturer will supply a copy of the bill of lading on
request if occasion to file a claim arises. When requesting information
about this equipment it is essential that Model Description and Serial
Number of the equipment be supplied.
4. Use the cart or two-wheel hand dolly to carefully move the console to
its intended working location.
A.
Console Wall-Mounting
1.
To mount console to a wall, determine the appropriate height.
(Placing the console top at a height between 66 and 70 in.
[168 and 178 cm] accommodates most operators.)
Verify that the wall to which the console is to be mounted is sturdy
enough to support the console’s weight (100 lbs. [45.4 kg]). Have
maintenance or carpentry personnel reinforce the wall as needed
BEFORE attempting to mount the console.
