Model 3710 Plasma Control Console
Operator’s
Manual
_____________________________________________________________________________________________________________________
Issued: 03/11
Page
33
H. Power
Connections
1. Verify that console E-STOP button is pushed in. Assemble an
appropriate length of 14AWG, 3 conductor, shielded cable to the
supplied power connector plug (P/N
5004713
), then connect the plug
to the console J1 connector.
2. Assemble an appropriate plug to the opposite end of the power cable
and connect the plug to a 115 VAC power source.
3.
Attach the E-stop box power cable P/N
5005028
to E-stop box 115
VAC POWER IN connector, and then to a 115 VAC power source.
I.
Auxiliary/Optional Equipment Connections
1. Connect cable # 3 (P/N
5008540
) to console AUXILIARY POWER
OUTPUT connector, then to a user-defined auxiliary device.
2. Connect a user-supplied cable from a switch closure to USER -
DEFINED INTERLOCK connector located on the E-stop box.
User-defined interlock
is designed to allow the user to prevent system
operation before certain conditions, or states, are satisfied. In essence,
certain conditions, such as dust collection system operation, light curtain
on, doors opened/closed, must be met before the operator can proceed
with spray operations. Connecting a switch closure to the USER-
DEFINED INTERLOCK connector allows for this added layer of safety.
For more information on this feature, contact our service department.
Console will not power up if the E-stop box is not connected to a user-
defined interlock or jumpered out.
AUX
