SK
26
Apply the lower half-bearings to the small ends (pos.
c
, fig.83), making sure that the lugs on the half-
bearings are positioned in the slots on the small ends (pos.
d
, fig.83).
Attach the small ends to the big end halves using the M12x1.25x87 screws (pos.
c
, fig.84).
Set the screws with a torque wrench, as shown in section 3, at the same time bringing the screws to the
tightening torque.
Be careful of the correct direction of assembly of the small ends. The numbering must face
upwards.
Insert a shim under the shank of the central connecting rod, to stop the rotation of the crankshaft (pos.
c
,
fig.85).
fig. 83
1
fig. 84
1
2
fig. 85
1
Summary of Contents for SK Series
Page 1: ...SK 1 SK Series Repair Manual Menu ...
Page 2: ...SK 2 ...
