Pramac P Series, Operator'S Manual

Page: 7 / 48

2 Introduction
7
▪
This symbol is used for lists.
2.2 PRAMAC representative
Depending on your country, your PRAMAC representative is your PRAMAC
service, your PRAMAC affiliate or your PRAMAC dealer.
You can find the addresses in the Internet at
WWW.PRAMAC.COM
The address of the manufacturer is located at the beginning of this operator's
manual.
2.3 Described machine types
This operator's manual is valid for different machine types from a product range.
Therefore some figures can differ from the actual appearance of your machine.
It is also possible that the descriptions include components which are not a part of
your machine.
Details for the described machine types can be found in the chapter
Technical
data .
2.4 Identification of the machine
Nameplate data
The nameplate lists information that uniquely identifies your machine. This
information is needed to order spare parts and when requesting additional
technical information.
➢
Enter the information of your machine into the following table:
Designation Your information
Group and type
Construction year
Code no.
Serial no.