Pramac P Series, Operator'S Manual

Page: 29 / 48

7 Operation
29
See the parallel Kit Operator’s Manual
NOTE : All connections to parallel kit should be made while both inverters are
turned off and loads disconnected
1.
Make sure the Economy throttle is in the same position on both generators
2. Make appropriate parallel connections to the outlets on each inverter as
outlined in the owner’s manual supplied with the kit.
NOTE : Do not disconnect any parallel kit connections once the units are running
3. Start both units per starting instructions. Once the green output indicator
illuminates, devices can be connected and turned on using the parallel kit
outlet.
4. Follow Stopping the engine instructions
NOTE : Only use Pramac approved parallel kit