Pramac P Series, Operator'S Manual

Page: 12 / 48

3 Safety Regulations
12
▪
NEVER overload generator. The total amperage of the parts connected to
the generator may not exceed the output limit.
▪
NEVER operate the machine in snow, rain or standing water.
▪
NEVER allow untrained personnel to operate or maintain the generator.
Familiarize yourself with the operation and shutdown before starting the
generator.
▪
ALWAYS store the machine properly when not in use. Store the machine in
a clean dry place and keep it out of reach of children.
▪
ALWAYS make sure that the machine is stable and cannot tip, roll, slide or
fall during operation.
▪
ALWAYS transport the generator in an horizontal position.
▪
ALWAYS keep at least one meter distance from facilities, buildings or other
machines while operating the machine.
▪
ALWAYS keep the area immediately around and under the machine clean,
tidy and free of grime and flammable materials. Check that there is also no
grime above the machine that could fall onto or into the machine or the
exhaust area.
▪
ALWAYS keep all tools, power cables and other loose objects away from the
generator before starting.
▪
Do NOT ground this generator.
▪
If more than one electric device is connected to the generator, the additional
connected electric equipment must be connected to the generator via an
isolating transformer or a suitable FI switch (PRCD), whereby each additional
electric device must be operated via a separate isolating transformer or
PRCD.
Generator vibration
Generators vibrate during normal operation. Check during and after use of the
generator whether the generator or the extension cord and power cable show
damage due to vibration.
▪
Repair any damage as needed or replace the parts affected.
▪
Do not use any plugs or cables that show signs of damage, such as damaged
or cracked insulation or blades.