Pramac P Series, Operator'S Manual

Page: 28 / 48

7 Operation
28
The Off / Run / Choke switch controls the flow of gasoline from the fuel tank to the
carburetor. The switch should be in the “I” position when starting and operating the
generator. The switch should be in the “O” position when the engine is not running
and when storing or transporting the unit.
NOTE : The Off / Run / Choke switch helps to prevent stale fuel from remaining in
the carburetor while storing or transporting the unit. Run the fuel out by turning the
knob to the “O” position and letting the engine run until it stops.
Choke
The Choke position on Off / Run / Choke switch is used when starting the engine
“cold” (the engine is not hot).
NOTE : Choke is not required to start a warm engine.
220/230/240V AC Outlets
The Outlets are used to power 220/230/240V Single Phase 50Hz loads requiring
up to continuous power. This socket is only corresponding to a client, the different
laws and regulations according to the sales area changes corresponding to the
socket.
Ground Terminal
The Ground (Earth) terminal is used to ground the generator when grounded
electrical devices are being used. Consult an electrician for local grounding
regulations.
Parallel Connection within 2 generator