5/24
POWER SUPPLY-MAINS
Connect the power cord as follows:
L (live) =brown
E (earth) =yellow/green
N (neutral) =blue
If you install a cord cap on the power cable to allow connection to power outlets, install a grounding-type (earthed) plug, following
the plug manufacturer’s instructions.
To apply power, first check that the head pan and tilt locks are released.
The cores in the power cable are coloured according to the following table.
Core (EU)
Core (US)
Connection
Plug Terminal Marking
Brown
Light blue
Yellow/Green
Black
White
Green
Live
Neutral
Earth
L
N
The earth has to be connected!
If you have any doubts about proper installation, consult a qualified electrician.
Use the plug provided to connect the mains power to the projector paying attention to the voltage and frequency marked on the panel
of the projector. It is recommended that each projector be supplied separately so that they may be individually switched on and off.
IMPORTANT
It is essential that each projector is correctly earthed and the electrical installation conforms to all relevant standards.
Fixtures must be installed by a Qualified electrician in accordance with all
national and local electrical and construction codes and regulatio
n.
