2/24
INDEX
1.
SAFE USAGE OF THE PROJECTOR
3
2.
INSTALLING THE PROJECTOR
4
3.
POWER SUPPLY – MAINS
5
4.
CONTROL CONNECTIONS
6
5.
DMX TERMINATOR
6
6.
SETUP OPTIONS-PROJECTOR CONFIGURATION
7
7.
TO SET THE DMX START ADDRESS
7
8.
STAND-ALONE MODE
7
9.
MASTER/SLAVE MODE
7
10.
TECHNICAL DATA
8
11.
OPERATION MENU
11
12.
REPLACING GOBOS
16
13.
DMX PROTOCOL
17
14.
INDICATION OF LED DIGITAL TUBE
19
15.
MAINTENANCE
19
16.
LUBRICATION
19
17.
KEEPING THE PROJECTOR CLEAN
19
18.
TROUBLESHOOTING
20
19.
COMPONENT ORDER CODES
20
20.
ELECTRICAL DIAGRAM
21
21.
PCB CONNECTION DIAGRAM 22
Please note that as part of our ongoing commitment to continuous product development, specifications are subject to change wi thout notice. Whilst
every care is taken in the preparation of this manual we reserve the right to change specifications in the course of product improvement. The
publishers cannot be held responsible for the accuracy of the information herein, or any consequence arising from them.
Every unit is tested completely and packed properly by the manufacturer. Please make sure the packing and / or the unit are in good condition
before installation and use. Should there be any damage caused by transportation, consult your dealer and do not use the unit . Any damage caused
by improper use will not be assumed by the manufacturer and / or dealer.
ACCESSORIES
These items are packed together with the projector:
Name
Quantity
Unit
Remark
G clamps
2
Pcs
XLR cable
1
Pc
with plug and socket
Safety cord
2
Pcs
This manual
1
Pc
Power cord
1
Pc
Ω clamps
2
Pcs
Optional
XLR terminator
1
Pc
Optional
