![background image](http://html1.mh-extra.com/html/pr-electronics/4590/4590_product-manual_1593026004.webp)
4 4590V101-UK
Warning
This device is designed for connection to hazardous electric voltages. Ignoring this warning can result in
severe personal injury or mechanical damage.
To avoid the risk of electric shock and fire, the safety instructions and warnings of this guide must be
observed and the guidelines followed. The specifications must not be exceeded, and the device must
only be applied as described in the following.
Prior to the commissioning of the device, this guide must be examined carefully.
Only qualified personnel (technicians) should operate this device. If the equipment is used in a manner
not specified by the manufacturer, the protection provided by the equipment may be impaired.
Repair of the device must be done by PR electronics A/S only.
Warning - risk of explosion hazard
To avoid risk of explosion and injury:
• Do not use this equipment when a flammable or combustible atmosphere is present
• Do not replace batteries unless area is known to be safe.
• Use 3 x 1.5 V TYPE AAA batteries only and insert correctly as stipulated in battery compartment.
Warning - risk of electrical shock
To avoid risk of electrical shock and injury:
• Do not disconnect the cable from ConfigMate 4590 while cable is connected to a SYSTEM 3000
device.
• Do not remove 4501 while the cable is connected to a SYSTEM 3000 device.
• Do not replace batteries while the cable is connected to a SYSTEM 3000 device.
Symbol identification
Triangle with an exclamation mark:
Warning / demand. Potentially lethal situations.
The CE mark
proves the compliance of the device with the essential requirements of the directives.
The double insulation symbol
shows that the device is protected by double or reinforced insulation.
GENERAL
EXPLOSION
ELECTRICAL
SHOCK