background image

8 4590V101-UK

Adaptor Mode

   The 4590 is a handheld device that can operate as an adapter between the detachable 4501 Programming Display or the 

4511 Digital Communication Enabler and selected devices in the 3000 series. This allows for configuration and monitoring 
of process parameters of the connected devices.

  Note for connection to a 3000 series product, the PR USB-B to a 2.5 mm jack cable must be used. 

   By pressing the power button, the 4590 will power on, and show the status of the attached 3000 device on the 

4501/4511.

   If the 3000 device is powered, the 4501/4511 display will indicate the process variable or can be manually set to go into 

program mode.

  If the 3000 device is not powered the 4501/4511 display will be in program mode only.

   Indication of battery level is displayed via the LEDs.  This can be activated by using the Power/Wake-up button.  If while 

pressing the Power/Wake-up button the LEDs are off, or only one LED is lit, the batteries should be exchanged.  To extend 
battery life the 4590 will automatically detect if it is not in use, and will consequently shut itself down to conserve 
battery power.

  Battery life in Adaptor Mode is approximately 1 year of daily use, depending upon battery type.

Connection of ConfigMate 4590 to a PR 3000 Device

USB and PReset installation (Docking Mode Only)

The USB communication is supported by Windows Windows 7, 8 and 10. PR devices that can either be programmed or have 
their configurations saved, backedup/restored via ConfigMate 4590 are available in the configuration program PReset ver. 6.0 
or higher.

Technical characteristics

The PC program PReset ver. 6.0 or higher supports ConfigMate 4590. To conserve power on a laptop, the USB connector of the 
4590 can be connected to an externally supplied hub. The communications connector on the PR device is galvanically isolated 
from the USB connection on the PC.

System requirements

Access to internet is needed for installation of USB drivers
Installation rights
Windows 7, 8 or 10 with the following recommendations: 
 Processor   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .  > 1 GHz 
 Memory   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   1 GB RAM (32-bit) or 2 GB RAM (64-bit)
  Hard disk space  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   16 GB (32-bit) or 20 GB (64-bit)

Summary of Contents for 4590












Reviews: