RECORDER CONFIGURATION
Table : 9.1
Continuous
Batch
(Default : Continuous)
Parameter Description
Settings
(Default Value)
The UniRec respects this parameter value for generating periodic
records when none of the devices is under Alarm condition. For
e.g., If this parameter value is set to 0:02, then a new record is
generated every 2 Minute, if no alarm is active.
Setting this parameter value to 0:00 disables normal recording.
NORMAL RECORDING INTERVAL
NORMAL INTERVAL>>
0:02
(Default : 0:01)
0:00 (H:MM)
to
2:30 (H:MM)
The UniRec respects this parameter value for generating periodic
records when one or more alarms of any device is active. For e.g.,
If this parameter value is set to 0:01, then a new record is
generated every 1 Minute whenever one or more alarms is active.
Setting this parameter value to 0:00 disables zoom recording.
ZOOM RECORDING INTERVAL
ZOOM INTERVAL>>
0:01
(Default : 0:01)
0:00 (H:MM)
to
2:30 (H:MM)
RECORD GENERATION ON
ALARM STATUS TOGGLE
ALARM TOGGLE REC
Disable
Set to ‘Enable’ if a record is to be generated whenever the Alarm
status for any of the devices is toggled (On-to-Off or Off-to-On).
Disable
Enable
(Default : Enable)
Continuous
The UniRec keeps generating records indefinitely. There are no
Start / Stop commands.
Batch
The UniRec generates records over a preset time interval. The
recording begins upon issuance of Start command and continues
until the user set time interval is elapsed. Suitable for Time-Slot
recording.
SELECT RECORDING MODE
RECORDING MODE>>
Continuous
TIME INTERVAL FOR
BATCH RECORDING
BATCH TIME>>
1.00
(Available for Batch Recording Mode)
Sets the time period in Hours:Minutes for which the recording is to
take place from the time the Start command is issued.
(Default : 1:00)
0:01 (HH:MM)
to
250:00 (HHH:MM)
User Manual
UniRec
19
Section 9
