SUPERVISORY CONFIGURATION
The Page Header ‘Spvr. Config’ encompasses a subset of Page Headers containing parameters that are set less frequently.
These parameters should only be accessible to Supervisory level and thus are protected by password. Upon entering the
appropriate password for the parameter ‘ENTER PASSCODE’, the following list of Page Headers is available.
1. Device Configuration (Device Config)
2. Relay Configuration (Relay Config)
3. Recorder Configuration (Recorder Config)
4. RTC Settings (RTC Settings)
5. Utillites (Utillites)
The figure below illustrates how to access the parameters under the supervisory Page Header “Recorder Configuration”. The
parameters covered under each Page Header are described in detail in the following sections.
Figure 6.1
User Manual
UniRec
15
Section 6
Boiler Temp.
SELECT PAGE>>
Operator Page
MAIN Display Mode
First Available Page Header
SELECT PAGE>>
Spvr. Config
ENTER PASSCODE>>
0
Select Supervisory Configuration
Passcode Screen
91 C
ENTER PASSCODE>>
22
Set Passcode 22
SELECT PAGE>>
Device Config
First Supervisory Page Header
Desired Supervisory
Page Header
NORMAL INTERVAL
>>
0:01
First Recorder Config
Parameter
SELECT PAGE>>
Recorder Config
or
or
or
