Parameter Description
Settings
(Default Value)
‘START’ COMMAND FOR
BATCH RECORDING
(Available if Batch Recording is selected)
Set to ‘Yes’ to start recording the data. This is usually issued at the
begining of a time-slot recording.
BATCH START>>
NO
(Default : No)
No
Yes
‘STOP’ COMMAND FOR
BATCH RECORDING
BATCH STOP>>
NO
(Available if Batch Recording is selected)
Though the Batch Recording automatically stops at the end of the
set time interval; it may be desired to abort recording any time
during the batch. Set this command to ‘Yes’ to stop recording the
data.
(Default : No)
No
Yes
User Manual
UniRec
20
