User Manual
ScanLog 96 Pen Drive Version
16
The Page Header ‘Spvr. Config’ encompasses a subset of Page Headers containing parameters that are set less frequently.
These parameters should only be accessible to Supervisory level and thus are protected by password. Upon entering the
appropriate password for the parameter ‘ENTER PASSCODE’ , the following list of Page Header is available.
1. Device Configuration (
Device Config
)
2. Channel Configuration (
Channel Config
)
3. Alarm Configuration (
Alarm Config
)
4. Recorder Configuration (
Recorder Config
)
5. RTC Settings (
RTC Settings
)
6. Utilites (
Utilites
)
7. Return to Main Mode (
Exit
)
The figure below illustrates how to access the parameters under the supervisory Page Header “Alarm Configuration”. The
parameters covered under each Page Header are described in detail in the following sections.
SUPERVISORY CONFIGURATION
Section 6
Figure 6.1
Main Screen
First Page
Desired Page
Press SET-UP Key
or
Press UP/DOWN Keys
to select next Page
Press ENTER Key
Press UP/DOWN Keys
to select desired Page
Header
or
Press ENTER Key
To access parameters
for selected Page
Header
First Parameter
under selected
Page Header
Desired
Page Header
First
Page Header
Press UP/DOWN Keys
to enter correct
passcode
or
Correct Passcode
Passcode Screen
Press ENTER Key
To access Page
Header
Boiler Pressure
2.1 PSI
SELECT PAGE>>
Operator Paras
SELECT PAGE>>
Spvr. Config
ENTER PASSCODE>>
0
ENTER PASSCODE>>
22
SELECT PAGE>>
Device Config
SELECT PAGE>>
Alarm Config
ALARMS/CHAN>>
4
