User Manual
ScanLog 96 Pen Drive Version
14
Parameter Description
SELECT CHANNEL
(
Available only for Dual Channel Version
)
Select the desired Channel Name whose Alarms parameters are
to be set.
1 or 2
Settings
(Default Value)
ALARM SETTINGS
Section 5
The Figure 5.1 shows how to access Alarm Setting Parameters. The Example illustrates how to change the Alarm 2 setpoint
value for channel 2.
Figure 5.1
Main Screen
First Page
Next (desired)
Page
Press SET-UP Key
or
First Alarm (AL1)
*
Desired Channel
Press UP/DOWN Keys
to select Channel Value
Press ENTER Key
to select Alarm
number
or
Press UP/DOWN Keys
to select next Page
Press ENTER Key
To open Alarm
Settings List
or
Press UP/DOWN Keys
to select Alarm Number
Desired Alarm
Number
Press ENTER Key
to open AL2
Parameter List
Press ENTER Key
to select desired
parameter
or
Press UP/DOWN Keys
to adjust Parameter Value
Press ENTER Key
to store the New Value
& to move to Next Parameter
*
First Parameter
in Alarm Settings
List
First Parameter
for Alarm 2
Desired Parameter
for Alarm 2
Desired Value
Next Parameter
Boiler Pressure
2.1 PSI
SELECT PAGE>>
Operator Paras
SELECT PAGE>>
Alarm Settings
SELECT CHANNEL>>
1
SELECT CHANNEL>>
2
SELECT ALARM>>
AL1
SELECT ALARM>>
AL2
AL2 TYPE>>
Process Low
AL2 SETPOINT>>
1.6
AL2 SETPOINT>>
1.4
AL2 HYSTERESIS>>
0.2
*
Parameters not present in Single Channel Version
