4
opening CoMManD
Command permission to the buttonhole or transmitter to operate during the gate
opening route.
Operations:
1. The gate must be stopped;
2. Close the PROG jumper;
3. Press and release the CMD button (2x);
4. Press and release the REC button to enter the function;
5. GRV + button to enable command in the opening, or CMD button to disable
the command in the opening.
6. Finally, remove the PROG jumper.
Deleting transMitters
Delete and initialize the memory to record the new transmitters.
Operations:
1. Gate must be stopped;
2. Close jumper PROG;
3. Press and release the CMD button (3x);
4. Press and release the REC button to enter the function;
5. REC to erase the memory of the transmitters, or CMD Button or
Remove jumper PROG (Cancel function).
reCorDing transMitters
PPA default transmitters (fixed and rolling code) are supported.
Operations:
1. Gate must be stopped;
2. Close jumper PROG;
3. Press the transmitter button you want to record;
4. SN LED should be flashing fast;
5. Press and release the GRV + button;
6. The SN LED will flash 1 time (recorded button) or flash 3 times (full memory);
7. Release the transmitter button;
8. Go back to step 3 to record new transmitter button;
9. Finally, remove PROG jumper.
