background image

page no. 8 of 36 

    

Vision Maxi

 User Instructions  Doc Ref M609 issue 1.0 June 2021.

  

 Specific warnings for R32

This document contains only some of the warnings 

related to the refrigerant R32. For more comprehensive 

information, carefully read the safety data sheet 

available from the dealer.

Each chapter contains specific warnings for the operations 
it describes. These warnings must be read before starting 
activities.

R32 refrigerant gas is flammable and odourless.

All precautions concerning the treatment of the refrigerant 
must be observed following the regulations in force.

The unit must be installed in a room without a continuously 

operating source of ignition (e.g. an open flame, an 

operating gas appliance or an operating electric heater). 
Ensure that in the event of a leakage of fluid, the fluid does 
not leak into the room creating a fire or explosion hazard.

Do not place flammable objects (spray cans) within 1 
metre of the air outlet.

Do not puncture or burn  the unit.

Do not use any means to speed up the defrosting process. 
Use brushes or tools that do not involve risks of perforating 
the exchangers or igniting flames to clean the exchangers.

The unit uses environmentally friendly R32 refrigerant gas, 

with a Global Warming Potential (GWP) = 3. Do not release 
R32 gas into the atmosphere.

1.5    Basic rules of security

Please keep in mind that the use of products powered by 
electricity and water call for operators to comply with certain 
essential safety rules:

The use of the appliance to children and unassisted 

disabled persons is prohibited.

It is forbidden to touch the device with wet or damp body 
parts.

It is forbidden to clean the device before having 
disconnected it from the mains by setting the main switch 
of the system to "off".

It is forbidden to modify the safety or adjustment devices 
or adjust without authorization and indications of the 
manufacturer.

It is forbidden to pull, unplug or twist the device's electric 
cables, even if it is disconnected from the mains.

It is forbidden to introduce objects and substances 
through the air inlet and outlet grilles.

It is forbidden to open the access doors of the device's 
internal parts without first having set main switch of the 
system to" off".

It is forbidden to dispose of, or leave in the reach of 
children, the packaging materials which could become a 
source of danger.

It is forbidden to climb with your feet on the device and/
or place any kind of object on top of it.

 Specific safety rules for R32

Smoking in the vicinity of the appliance is prohibited.

Using a mobile phone near the appliance is prohibited.

Using leak detectors with halogen lamps is prohibited.

1.6    Disposal

The symbol on the product or its packaging indicates that 
the product must not be treated as normal household waste, 
but must be taken to the appropriate collection point for the 
recycling of electrical and electronic equipment.
Proper disposal of this product avoids harm to humans and 
the environment and promotes the reuse of valuable raw 
materials.
For more detailed information about the recycling of this 
product, contact your local city office, your household 

waste disposal service or the shop where you purchased the 
product.
Illegal disposal of the product by the user involves the 
application of the administrative sanctions provided for by 
the regulations in force.
This provision is only valid in the EU Member States.

Avoid disassembling the unit yourself.

This unit contains fluorinated greenhouse gases covered 

by the Kyoto Protocol. Maintenance and disposal 
operations must be carried out by qualified personnel 
only.

Contact an authorised Technical Assistance Centre to 

disassemble the appliance.

Summary of Contents for Vision Maxi





































Reviews: