page no. 17 of 36
Vision Maxi
User Instructions Doc Ref M609 issue 1.0 June 2021.
The units are supplied with a paper template for marking the
holes necessary for installation.
A
Holes for M8 dowels
B
Electrical connection area
C
Ø162 mm holes for air channelling for models 8 HP On-Off - 10 HP DC Inverter - 12 HP DC Inverter - 12 HP DC Inverter ELEC
D
ø 16 mm condensate drain
E
anti-lifting bracket hole
F
Ø 202 mm holes for air channelling for models 15 HP DC Inverter
B
C
F
IN
OUT
D
E
A
Hold the template in the correct position with tape.
Preliminary warnings
The wall mounting bracket supplied as an accessory is
required to position the unit on the wall.
Make sure that:
• the wall supports the weight of the appliance
• the section of floor or wall does not concern piping or
electrical lines
• the functionality of load-bearing elements is not
compromised
Installation arrangement
The units can be positioned on the floor or on a high or low
wall.
The ..2.0 range of air conditioners without an external unit
are designed for indoor installation on a perimeter wall .