P O W I S P R I N T E R
Ô
M O D E L 3 1 U S E R ’ S M A N U A L
23
Method B: Print, review, re-feed and bind
3. Press the PRINT key.
4. The keyboard display will now tell you to insert the correct strip
size, based on the width of the document in the Fastback® binder:
INSERT N/M/W STRIP
NOTE:
N/M/W = NARROW OR MEDIUM OR WIDE
When you insert the Binderstrip™ into the Feed Entry (figure 2),
make sure that:
• The Binderstrip™ is adhesive side up
• The Binderstrip™ is fed straight into the machine
• You are feeding only one strip (sometimes they stick together
in the box)
• The Binderstrip™ width matches the width the printer has
requested
• The Binderstrip™ is clean and no Binderstrip™ fragments are
attached
5. The PowisPrinter™ will now print the Binderstrip™, and eject it.
6. Inspect the Binderstrip™ printing for accuracy. Jump back to step
2 to correct any text errors.
7. Press the BIND ONLY key to send the Binderstrip™ through the
PowisPrinter™ to the Fastback® binder to bind the document.
8. Insert the printed Binderstrip™, adhesive side up, back into the
PowisPrinter™.
9. When the Fastback® binder’s book clamps open, remove the
bound document and place it spine down in the Cooling Rack.
Allow it to cool for five to seven minutes.
P O W I S P R I N T E R
™
+ A F A S T B A C K
®
