PowerWalker VFI 10000 RTG, User Manual

Page: 46 / 59

43
2. Choose the operation system you need and follow the instruction described
on the website to download the software.
3. When downloading all required files from the internet, enter the serial No:
511C1-01220-0100-478DF2A to install the software.
When you finish installation, restart your computer, the WinPower software will
appear as a green plug icon located in the system tray, near the clock.
7. UPS maintenance
7.1 Equipment care
For the best preventive maintenance, keep the area around the equipment
clean and dust free. If the atmosphere is very dusty, clean the outside of the
system with a vacuum cleaner.
For full battery life, keep the equipment at an ambient temperature of 25°C
(77°F).
If the UPS requires any type of transportation, verify that the UPS is
disconnected and turned off. The batteries are rated for a 3-5 year service life.
The length of service life varies, depending on the frequency of usage and
ambient temperature. Batteries used beyond expected service life will often
have severely reduced runtimes. Replace batteries at least every 4 years to keep
units running at peak efficiency.
7.2 Transporting the UPS
The internal UPS batteries MUST be disconnected before transport.
The following procedure should be performed or supervised by personnel
knowledgeable about batteries and the required precaution. Keep unauthorized
personnel away from batteries.
If the UPS requires any type of transportation, the batteries must be
disconnected (but not removed) before the unit is transported:
1. Verify that the UPS is off and disconnected from utility power.
2. Place the UPS on a flat, stable surface with the front of the cabinet facing
you.
3. Remove the UPS front cover
4 .Disconnect the internal battery connectors
5. Replace the UPS front cover
7.3 Storing the equipment
If you store the equipment for a long period, recharge the battery every 6