PowerWalker VFI 10000 RTG, User Manual

Page: 20 / 59

17
1. Set up the ‘Extension plate’ as below and install to ‘Stabilizer bracket’ from UPS.
2. Connect to UPS with ‘Battery power cable’--- Refer to rack position installing.
Note:
This unit is recommended to be installed to UPS’s right side.
If installing additional unit, place it next to the previous unit in their final location.
4. Power cables connection
Recommended protective devices and cable cross-sections
Recommended upstream protection
UPS power rating Upstream circuit
6000VA D curve – 63A
10000VA D curve – 100A
to UPS Normal AC / Bypass AC source
G N(L2) L1
Read the Safety instructions page 3 regarding backfeed protection requirements.
Recommended cable cross-sections
Model
6K 10K
N(L2)