PowerWalker VFI 1000 LCD, Manual

Page: 18 / 202

15
EN
3-7. Faults Reference Code
Fault event Fault code Icon Fault event Fault code Icon
Bus start fail 01 x Inverter output short 14
Bus over 02 x Battery voltage too high 27
Bus under 03 x Battery voltage too low 28
Inverter soft start fail 11 x Over temperature 41 x
Inverter voltage high 12 x Overload 43
Inverter voltage Low 13 x Charger failure 45 x
3-8. Warning indicator
Warning Icon (flashing) Alarm
Low Battery Sounding every 2 seconds
Overload Sounding every second
Battery is not connected Sounding every 2 seconds
Over Charge
Sounding every 2 seconds
Site wiring fault
Sounding every 2 seconds
EPO enable Sounding every 2 seconds
Over temperature Sounding every 2 seconds
Charger failure Sounding every 2 seconds
Battery fault
Sounding every 2 seconds
(At this time, UPS is off to remind users
something wrong with battery)
Out of bypass voltage range Sounding every 2 seconds
Bypass frequency unstable Sounding every 2 seconds
EEPROM error Sounding every 2 seconds
Fan failure Sounding every 2 seconds
Battery replace Sounding every 2 seconds
NOTE:
“
Site Wiring Fault
”
function can be enabled/disabled via software. Please check
software manual for the details.