Document A55-00042 Rev. I POWERVAR Mobile Power Manager
P a g e
| 11
Clinic View Dashboard: Time Remaining Fuel Gauge & Warning Indicators
If the optional
MPMView
software is installed on your workstation, a small
battery icon will appear in the task bar as shown below by the red arrow. Click
the task bar icon (see red arrow) to open the “Clinic View” dashboard.
The software dashboard provides a
“fuel gauge”
with estimated clock
time
remaining
from the battery. The estimated time reported will adjust based on
the actual electrical load of your workstation.
For example, if your computer workstation enters a low-power energy-saving
mode after some period of inactivity – the estimated time available from the
battery system will be recalculated and revised upward based on the reduced
energy draw, (allow 10-20 seconds for dashboard information to be updated).
When disk drives and other system activity are reactivated and power
consumption increases, the available time estimate from the battery will be
reduced based on the increased load on the system.
MPM “ClinicView” dashboard
.
Task bar icon for MPMView
Summary of Contents for MPM
Page 6: ...Document A55 00042 Rev I POWERVAR Mobile Power Manager P a g e 6 ...
Page 13: ...Document A55 00042 Rev I POWERVAR Mobile Power Manager P a g e 13 ...
Page 30: ...Document A55 00042 Rev I POWERVAR Mobile Power Manager P a g e 30 Physical Dimension Drawings ...
Page 31: ...Document A55 00042 Rev I POWERVAR Mobile Power Manager P a g e 31 ...
