UZK12.071/ UZB12.071/ UZO12.07
–
U-Series
Battery Module 12V, 7Ah
September 2006 / Rev. 1.0 / DS-UZK12.071-EN / All parameters are specified at 25°C ambient unless otherwise noted.
The information presented in this datasheet is believed to be accurate and reliable and may change without notice
.
www.pulspower.com Phone +49 89 9278 0 Germany
1/1
B
ATTERY
M
ODULES
A modular concept allows the user to meet individual
application demands and is available with two different
options:
You can order the module with an assembled battery or
you can choose only the bracket allowing the mounting
of individual batteries such as long life or higher current
which achieves a longer buffer-time. The mounting
bracket allows the battery to be assembled just in time
avoiding outdated batteries due to limited shelf life.
■
Two mounting options:
DIN-Rail or panel/wall mounting
■
Easy access to the terminals and the fuse
■
Heavy duty fuse holder and spare fuse included
D
ATA
D
ATA
Battery
Maintenance free valve regulated lead acid battery
Battery voltage
nom 12Vdc
Battery capacity
nom 7Ah
Self-discharge
typ
3%/ month at 20°C
Design life (EUROBAT)
3 to 5 years
Fuse
Blade terminal fuse
nom
30A ATO
®
(257 030 Littelfuse)
Terminals and Wiring
Type
Screw
terminals
Solid wire
nom 2.5-4mm
2
Stranded wire
nom 2.5-4mm
2
American wire gauge
max 12 AWG
Wire stripping length
nom 7mm / 0.275”
Tightening torque
nom 0.8Nm / 7lb.in
Ambient Temperature
Operation
min +0°C to +40°C
Storage and transport
min -20°C to +50°C
Instructions for Use and Disposal of the Battery
Place the battery module outside the cabinet or in the
coolest area when used inside the cabinet.
Use wires no smaller than 2.5mm
2
(or 12 AWG) and not
longer than 2x1.5m (cord length 1.5m).
Disconnect battery fuse before working on the battery
or on the DC-UPS.
To replace battery, loosen screw with only one turn and
slide the mounting bracket up.
For storage, installation and operation, the
requirements of the EN 50272-2 as well as other
national regulations must be observed.
Ensure sufficient ventilation for the battery.
Always dispose the batteries through a recycling
organisation. Batteries must be completely discharged
before recycling.
Dimensions and Weight
(UZK12.071)
Width
nom 155mm / 6.1“
Height
nom 124mm / 4.88“
Depth
nom 112mm / 4.41“
Weight
max 3200g / 7.06lb
The DIN-rail height when used must be added to the depth
to calculate the total required installation unit depth.
Warranty
3 Year limited warranty except battery as battery is
considered as a service part. Special conditions are part of
our general terms and conditions. Do not store the battery
longer than 9 month without supplementary charge or
performance might change.
O
RDER
N
UMBERS
M
ARKINGS
UZK12.071
Battery module with battery
UZO12.07
Mounting kit without battery
UZB12.071
Battery replacement
GL
Marine, pending
Battery, terminal block,
cables, fuse and fuse
holder are
UL
-approved
components.
2 rue René Laennec 51500 Taissy France
Fax: 03 26 85 19 08, Tel : 03 26 82 49 29
E-mail:[email protected]
Site web : www.hvssystem.com
