Powerten D3 Series, Operation Manual

Page: 31 / 65

Table 3-2
Connector J1 Designations and Functions
J1
DESIGNATOR
SCHEMATIC
SYMBOL
FUNCTIONAL
DESCRIPTION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
ISO
ON/OFF
ISO RTN
REM OV
SET
VP RTN
ON/OFF
COM
I MON
V SET
VP 5V
IP 5V
ISET
SENSE -
SENSE +
ISO
TTL/CMOS
Isolated remote on/off. Externally supplied AC/DC voltage
source for on/off control. A po) voltage will turn on
the supply. This input control is optically isolated from the
power supply circuit up to 500 VDC.
Isolated circuit return used with isolated on/off control
J1-1 and J1-14.
Remote overvoltage set. A remote signal sets the
overvoltage trip level. 0-5 VDC = 0-100%.
Voltage programming return. Used with J1-9, J1-15 or J1-
21 and must be referenced to or within ±3V of the circuit
common.
Remote on/off. Switch/relay contacts or a direct short
between this terminal and circuit common turns on the
unit.
Common Circuit.
Output current monitor. 0-10 VDC equals 0-100% rated
current.
0-5 VDC local voltage control monitor.
Remote voltage programming using a 0-5 VDC source.
Remote current programming using a 0-5 VDC source.
0-5 VDC local current control monitor.
Remote Sense (-) on <60 volts output units.
Remote Sense (+) on <60 volts output units.
Isolated TTL/CMOS on/off control. A high state
TTL/CMOS voltage turns on the power supply, and a low
state or open connection turns the supply off.
M550001-01 3-3