RED00202(R2) MANUAL
Safety regulations: Please read these instructions completely before using the equipment. Keep these
instructions on to hand. The device may only be operated by trained specialist staff.
Installation:
1) The device is designed for devices and systems
that meet the standard requirements for hazardous
voltages, power, and fire prevention.
2.) Installation and service only by trained persons.
The AC power must be switched off. The work is to be
labelled; accidental reconnection of the system must
be prevented.
3.) Opening the device, its modification, loosening
bolts, or operation outside the specified herein
specification or in an unsuitable environment, has the
immediate loss of warranty to follow. We disclaim any
responsibility for any resulting damage to persons or
things.
Warning:
Non-compliance these warnings can result in fire
and serious injury or death.
1. Allow neat and professional cabling.
2. Never open nor try to repair the unit. Inside
are dangerous voltages that can cause electrical
shock hazard.
3. Avoid metal pieces or other conductive
material to fall into the item
4. Do not operate the device in damp or wet
conditions
5. Do not operate the unit under EX-conditions
All parameters base on 15 minutes run-in @ full load / 25°C / 230Vac 50/60Hz, as otherwise stated.
www.powersolve.co.uk
020321
