Creating Custom models | 31
17 : 4.Initialize M-Drive DSP as Custom Model
If you have come to this stage it means that you have created a software plug-in for ArmoníaPlus™ which contains all the
parameters, names, descriptions and presets that characterize your finished product. Here we show how to straightforwardly
initialise each of your products with custom settings. This may represent a good solution if, in ArmoníaPlus™, you want to
immediately identify your proprietary product with the parameters that characterize it. Please note that the Custom Init button
is disabled if no Custom model are yet available on your list.
1. Open ProManager Plus™
2. Click on the DSP Initializer button
3. Discover the M-Drive using selected Com port as
shown previously and press Next
4. Select Custom Model
5. Select the model you have created during earlier
stages
6. Specify the product serial assigned to your system/
model
7. Choose a firmware version to be stored on your DSP
or tip the Skip firmware update check box
8. Press Start and wait until the DSP is successfully
initialized. At the end of initialization, device will be ready to
be recognized by Plugin previously installed.
Initialize the DSP as you
CUSTOM MODEL with
ProManager Plus
