16 | M-Drive | User guide
15 : 2.initialization framework
15 : 2.1. Initialization workflow
In order to initialize the DSP on board and external Powersoft DSP, the ProManager Plus™ proposes two approaches:
Powersoft init or Custom init. The former initializes your DSP with default settings, while the latter initializes the DSP with your
custom processing and it will allow ArmoníaPlus™ to identify your system as proprietary. As shown on the workflow, before
directly proceeding with a custom initialization of the DSP, you are required to create a valid custom model for your product in
which the presets – previously created for the Powersoft model with ArmoníaPlus™ – will be included.
This process of initialization will allow the DSP to take care of the processing and the level of the input signal according to
the known
characteristics of the Powersoft amplifier module to which the DSP is associated to.
Furthermore, this process will also identify your DSP as part of a Powersoft system, which will
permit you to discover the device when online in ArmoníaPlus™. The latter is a fundamental requirement in order to create
your original processing and your proprietary DSP presets designed for your whole finished system.
START
END
NOT
YES
Register on
Obtain your
Manufacturer Code
Download and install
ArmoníaPlus
Download and install
ProManager Plus
Create your custom pre-
sets with ArmoníaPlus
Export your custom presets
Initialize the DSP as a
Powersoft model with
ProManager Plus
Initialize the DSP as you
CUSTOM MODEL with
ProManager Plus
Create your CUSTOM
MODEL in ProManager Plus
Activate the
ProManager Plus
Already created your
CUSTOM MODEL
