ASSEMBLY INSTRUCTIONS
13
16. Remove the washer (HH) and nut (II) from the eye
bolt with rubber grommet (Q) found on the upper
chute crank (E).
16
E
B
Q
II
HH
17. Position the chute crank (E) so that the eye bolt with
rubber grommet (Q) inserts into the center hole of
the middle frame (B). Secure with washer (HH) and
nut (II).
Note:
Do not overtighten the nut.
17
E
B
HH
II
Q
GG
Hardware Used
HH
x 1
Ф6 × Ф13 × 1
Washer
II
x 1
M6 Nut
GG
x 1
7 mm
Two-sided open-end wrench
