ASSEMBLY INSTRUCTIONS
11
10. Insert the metal washer (HH) and the screw (JJ) into
the hole on the main cover (I) and tighten the screw
with the screwdriver (FF).
10
11. Loosen the two knobs on the chute deflector (G). Lift
the chute deflector (G) so that it snaps and locks
securely onto the discharge chute (H).
Note:
You should hear a loud click when the chute
deflector (G) locks into place.
11
Lift
and Lock
G
H
12. Raise or lower the chute deflector (G) to the desired
height and tighten the chute deflector knobs.
Note:
Do not overtighten the chute deflector knobs.
12
G
Hardware Used
HH
x 1
Ф6 × Ф13 × 1
Washer
JJ
x 1
ST6 x 30 Screw
FF
x 1
Phillips Screwdriver
JJ
HH
FF
I
