background image

2

PRODUCT SPECIFICATIONS

TABLE OF CONTENTS

Safety Information ...........................................................................................................................  5

Package Contents ...........................................................................................................................  3

Hardware Contents .........................................................................................................................  4

Preparation  .....................................................................................................................................  7

Assembly Instructions .....................................................................................................................   8

Operating Instructions ....................................................................................................................  14

Care and Maintenance ..................................................................................................................   18

Warranty  .......................................................................................................................................   18

SPECIFICATIONS

Voltage: 120 V, 60 Hz

Input power: 13 Amp

Rotation speed: 2,100 RPM

Plow width and depth: Approx. 46 cm x 23 cm (18 in. x 9 in.)

Max. spraying distance: 10 m (30 ft.)

Net weight: 16 kg (35.2 lbs.)

Summary of Contents for DB5011



















Reviews: