ASSEMBLY INSTRUCTIONS
12
13. Locate the upper chute crank (E) in the parts bag.
Remove the screw (EE) and nut (DD) from the upper
chute crank (E) using a Phillips screwdriver and the
wrench provided.
Note:
You may be able to unfasten the screw and nut
by hand.
13
E
Q
EE
DD
14. Slide the upper chute crank (E) into the lower chute
crank (F), aligning the screw holes.
E
F
14
15. Tighten the screw (EE) into the aligned holes using
the Phillips screwdriver (FF). Fasten the nut (DD)
with wrench (GG).
Hardware Used
DD
x 1
M4 Nut
EE
x 1
M4 x 16 Screw
FF
x 1
Phillips Screwdriver
GG
x 1
7 mm
Two-sided open-end wrench
15
EE
DD
FF
GG
F
E
