PowerShot PS3611ES, Instruction Manual

Page: 9 / 24

9.
IMPORTANT: Use soaps designed specifically for
pressure washers. Household detergents could
damage the pump.
To apply detergent follow these steps:
1. Review spray tip use.
2. Prepare detergent solution as required by
manufacturer.
3. Place chemical injection siphon/filter into
detergent container.
4. Make sure black spray tip is installed.
NOTE: Detergent cannot be applied with the high
pressure spray tips (White, Green, Yellow, or Red).
5. Make sure garden hose is connected to water
inlet. Check that high pressure hose is
connected to spraygun and pump; start engine.
6. Apply detergent to a dry surface, starting at
lower portion of area to be washed and work
upward, using long, even, overlapping strokes.
DO NOT allow detergent to dry on (prevents
streaking).
before washing and rinsing. Reapply as needed
to prevent surface from drying.
CAUTION! You must attach all hoses before
you start the engine. Starting the engine with-
out all the hoses connected and without the
water turned ON will damage the pump. Damage
to equipment resulting from failure to follow this
this instruction will void warranty.
CAUTION! Keep the chemical injection
tube from coming in contact with the hot
muffler. When inserting the filter into a detergent
solution bottle, route the tube so as to keep it from
inadvertently contacting the hot muffler.
CLEANING & APPLYING CHEMICALS
5.
10m. If a longer supply
INLET WATER SUPPLY
REQUIREMENTS
PS3611ES