
14.
4. Some remaining paint may curl up at the edges.
These edges should be scraped with a steel
brush or scraper just before painting.
1. Use clean water without detergent.
IMPORTANT: Spray straight into the radiator to
prevent bending fins.
2. If possible, direct spray in the direction opposite
to normal air flow through the radiator.
8.
Before Each Use:
1. Check engine oil level.
2. Check water inlet screen / filter for damage.
3. Check high pressure hose for leaks and damage.
4. Check detergent siphoning tube and filter for
damage.
6. Check spray gun, nozzle extension, and spray
tips for leaks.
7. Rinse out garden hose to flush out debris.
Check and Clean Inlet Screen / Filter
Examine the screen on the water inlet. Clean it if the
screen is clogged or replace it if screen is damaged.
Check High Pressure Hose
The high pressure hose can develop leaks from
wear, kinking, or abuse. Inspect the hose each time
before using it. Check for cuts, leaks, abrasions or
bulging of cover, damage or movement of couplings.
If any of these conditions exist, replace the hose
immediately.
WARNING! The high pressure stream of
water that this equipment produces can
pierce skin and its underlying tissues, leading to
serious injury and possible amputation. NEVER
repair high pressure hose. Replace it. Replacement
hose rating MUST exceed maximum pressure rating
of unit.
Check Detergent Siphoning Tube
Examine the filter on the detergent tube and clean if
clogged. The tube should fit tightly on the barbed
fitting. Examine the tube for leaks or tears. Replace
the filter or tube if either is damaged.
IMPORTANT: Simply shutting OFF engine will not
release pressure in the system. When the engine
has shut down, squeeze the trigger on the spray gun
to relieve the pressure in the hose.
CLEANING RADIATOR FINS
IMPORTANT: Some engine and radiator
manufacturers may not permit cleaning radiators
Operating Manual.
GENERAL MAINTENANCE
The pressure washer warranty does not cover
items that have been subjected to operator abuse
or negligence. To receive full value from the
warranty, the operator must maintain the pressure
washer as instructed in this manual.
periodically to properly maintain your pressure
washer
at least once each season.
pressure at the value marked on the tyre or
within 15 and 40 psi.
If equipped with inflatable tyres, keep the air
PS3611ES
Summary of Contents for PS3611ES
Page 11: ...STOPPING THE MACHINE NOZZLE INSTALLATION SELECTION 4 11 PS3611ES...
Page 22: ...22 PS3611ES...
Page 23: ...23 PS3611ES...