Powers Fasteners TI-C5 Series Service Manual Download

Page: 37 / 39

−

39. Assembling the Label

1.  Degrease the front and rear labeling sections of the body.
2.  Stick the Name Label to the front labeling section of the body.
3.  Stick the Warning Label to the rear labeling section of the body.

* Ensure that the labels are free from creases and bubbles.

ASSEMBLY PROCEDURE

WARNING LABEL

NAME LABEL

Name Label

Warning Label

Product

Part Code

Part Name

Product

Part Code

Part Name

TI-C5 LT(CE)
TI-C5 LT(AS)

56273

NAME LABEL (C5 LT)

TI-C5

LT(CE)

TI-C5 LT(AS)

TI-C5 ST(CE)
TI-C5 ST(AS)

56373

NAME LABEL (C5 ST)

TI-C5

ST(CE)

TI-C5 ST(AS)

TI-C5 DT(USA)

56372

NAME LABEL (C5 DT)

TI-C5 DT(USA)

56275 WARNING

LABEL

Magazine

Warning

Label

(Refer to the exploded view.)

Product

Part Code

Part Name

TI-C5

LT(CE)

TI-C5 ST(CE)

56383 MAGAZINE

WARNING

LABEL

WARNING LABEL

Summary of Contents for TI-C5 Series








































Search results

Summary of Contents for TI-C5 Series

Reviews:

Related manuals for TI-C5 Series

Brands by name

Popular brands

Powers Fasteners TI-C5 Series, Service Manual

Search results

Summary of Contents for TI-C5 Series

Reviews:

Related manuals for TI-C5 Series

Brands by name

Popular brands