18. Contact Arm Assy.
Groove for O-ring
Degrease the threaded part.
ARM BUSHING
(Kit # 56364)
After degreasing, apply LOCTITE 272 (indicated part).
Check if the Adjust
Stopper is set in the
groove in the Screw Rod.
With the Screw Cover removed,
assemble the Adjust Stopper.
ARM NUT
(Kit # 56364)
ARM WASHER
(Kit # 56364)
CONTACT ARM B
(56270)
CONTACT ARM C
(56278)
ARM WASHER
(Kit # 56364)
ARM NUT (Kit # 56364)
Check if the O-ring 1A 1.5 x 5
is set in the groove in the
Screw Rod.
ADJUST STOPPER (Kit # 56364)
SCREW COVER (56370)
O-RING 1A 1.5 x 5
(Kit # 56364)
SCREW ROD (Kit # 56364)
ARM BUSHING (Kit # 56364)
Groove for Adjust
Stopper
CONTACT ARM B (56270)
Put back the Screw
Cover to complete.
−
18
−
1. Assemble the Arm Bushing to the Screw Rod, followed by the
Contact Arm B.
2. Assemble the Arm Washer to the Screw Rod, foll
ASSEMBLY PROCEDURE
owed by the
degreased Arm Nut.
(Apply LOCTITE 272 to the threaded part. Tightening torque: 16
to 18 N·m)
3. Assemble the O-ring 1A 1.5 x 5 to the Screw Rod.
* Check that it is set in the groove in the Screw Rod.
4. Assemble the Screw Cover to the Contact Arm C.
5. Assemble the Contact Arm C to the Screw Rod.
6. Assemble the Adjust Stopper into the groove in the Screw Rod.
* Check that it is set in the groove in the Screw Rod.
