PowerPeak FHT6704, Manual

Page: 47 / 80

Attention
Some of the above mentioned parts have already been assembled to a main part. These are not
delivered separately!
ASSEMBLY
In order to familiarise yourself with the parts of the device, we advise you to study the overview
picture and the parts list carefully before you start assembly. Place all the parts on the floor and
remove all packaging materials.
Use the present tooling for assembling. Before assembling please check whether all needed parts are
available (at the above of this instruction sheet you will find an explosion drawing with all single parts
(marked with numbers) which this item consists of.
Step 1: Assembling the front and rear stabilizer
A: Insert the bolt (33) into the rear stabilizer (32), the main frame, arc washer (3) 2PCS, tighten with
domed nut (2) 2PCS.
B: Repeat the step, the front stabilizer (5) will be assembled in the same way.